(800) 835-0209
  • Become a Dealer
  • Careers
  • Dealer Homepage
Skip to content
Login
(800) 835-0209

Step 1 of 4

25%
Name(Required)
Please Complete the Following:(Required)
This field is hidden when viewing the form
1. When lowering a load, it is proper to stop it suddenly.(Required)
2. Industrial batteries can give off a potentially explosive gas.(Required)
3. Training and Certification is required for all powered Industrial Truck drivers.(Required)
4. The emergency brake should be set each time a driver gets off the seat of the truck.(Required)
5. It is permissible to let pedestrians pass under a high load when the truck is not moving forward.(Required)
6. A driver should always watch overhead clearances for fire lines, sprinkler heads, conveyors and other obstacles.(Required)
7. A load should always be positioned back against the carriage and properly centered on the forks.(Required)
8. Always back up steep ramps to avoid spilling the load.(Required)
9. Operators should elevate the load 2 to 4 feet while in motion to and from the stack.(Required)
10. You may have people sit on or add weight to the back of your truck to move a heavier load.(Required)
11. Loads may be temporarily stacked in front of seldom used fire equipment.(Required)
12. Racing, stunt driving or any other form of horseplay is absolutely forbidden.(Required)
13. Always keep hands, arms and feet inside the running lines of your vehicle.(Required)
14. The only way a person may be lifted with an industrial truck is in a personal platform or cage.(Required)
15. Never turn or maneuver on a ramp or bridge(Required)
16. A truck operator must always be able to clearly see where they are going,(Required)
17. LPG (propane) tanks should be stored outside of the building in storage racks or other suitable wire baskets.(Required)
18. Most four-wheeled trucks are actually suspended at only three points.(Required)
19. As a driver, it is your responsibility to watch out for pedestrians.(Required)
20. When picking up a load, forks should be level and each fork should be centered between the middle and outer pallet stringer boards.(Required)
1. The forks on a parked truck must be resting:(Required)
2. Never exceed the rated load capacity of your truck unless:(Required)
3. When transporting a load, you should:(Required)
4. If a load is unstable, the operator should:(Required)
5. While operating a truck, you should watch for overhead obstructions:(Required)
6. When operating a truck on a wet surface, you should:(Required)
7. When you leave your truck, you should:(Required)
8. Before loading or unloading a trailer, you should:(Required)
9. When parking on an incline, you should:(Required)
10. To move a load that weights about 3000 lbs. more than the capacity of the truck:(Required)
11. Speed has:(Required)
12. When a truck is not carrying a load, you should:(Required)
13. Loads should be raised:(Required)
14. When stacking palletized loads, the pallets:(Required)
15. The condition of the pallet:(Required)
16. When maneuvering a truck in a confined space, you should:(Required)
17. You are required to sound the horn on your truck:(Required)
18. What should an operator who tips over a truck do:(Required)
19. When making a right hand turn from one narrow aisle to another, where is the best place to begin the turn?(Required)
20. A good technique for driving a loaded truck over a bridge or railroad crossing is:(Required)
Acknowledgement(Required)
This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form

We are committed to building superior trailers and truck beds that work as hard as you do.

Links
Contact Us
  • Hillsboro Industries
  • 220 Industrial Road
  • Hillsboro, Kansas 67063
  • (800) 835-0209
© 2025 by Hillsboro Industries